Tag how to

We had a bumper crop of acorns recently. While this is good for squirrels, it also presents a great opportunity for a fun project that can be educational and help our urban forest! Growing your own oak from an acorn and planting it where it is needed is a great, easy way to combat the severe tree loss and damage we had in 2019.

Step Two: Prepare Your Acorn for Planting

While you can plant the acorn right away, taking an extra step can lead to greater success down the road and is a more exciting way to see the early growth stages. 

• Take a viable acorn and carefully insert three toothpicks, equally-spaced around the circumference, about half way between the top and bottom of the acorn.
• Set the acorn on the top of a small cup, glass, or jar (clear is best!), balancing the toothpick on the rim.
• Fill the container with water, so that the bottom half of the acorn is submerged.
• Put the acorn and container in a warm, sunny spot (a windowsill works great).
• As the acorn germinates, it will begin sending a large taproot down into the container.
• If you have a clear jar or cup, you can see its progress.
• After the root has grown, the acorn will begin to send up a green shoot from the top.
• PRO TIP: Given enough time, the shoot will put out a few familiarly-shaped leaves!

Acorns can also be germinated in bulk in a bag filled with moist potting soil. Keeping the bag in the refrigerator can help prevent mold growth. Once they have put out roots, they are ready to plant.

Step Four: Plant Your Tree Outside!

Once the oak seedling has become established, you can plant it outside to give it room to grow! It is best to plant a new tree in the fall or winter.

• Find a spot where there will plenty of room for the tree to spread its roots and canopy.
• Dig a hole about the same size as the container the seedling was in.
  • Unlike planting a larger tree, there should be no root issues requiring a larger hole.
• Remove the entire contents of the container and place in the hole.
  • PRO TIP: If you let the soil dry out a little bit, it should pull back from the sides of the container and slide out easily.
  • Make sure that the top of the container soil is at ground level; don’t plant it too deep.
• With the leftover soil from digging the hole, you can make a small ring around the tree, about a foot away from the stem.
  • You can also put down a some mulch, but make sure not to put any too close to the seedling’s stem.
• Placing a flag nearby will help you remember where the seedling is and keep it from possibly getting mowed down.
• If you are worried about animal activity or other damage, you can use a tomato cage or similar fence to protect your seedling as it grows.
  • Once it has grown about 18 inches tall, you can remove the cage.
• Be sure to keep the growing young tree watered and monitor it for signs of insect activity.
  • If you have questions about fertilizer or other care, ask a certified arborist.

At Texas Tree Surgeons, we love trees and we love our customers! Growing your own seedling from an acorn is a fun way to learn about trees and is a great way to get free trees for your yard. With a little prep and a little patience, you can soon have your own forest! Also, you can use a similar process to grow other acorn- or nut-producing trees, although oaks (especially red oaks) are often the quickest and easiest to start with. As always, if you have any questions about how to care for your trees, young or old, let us know!

Leaf and Bark Rubbing

What you need:

• Leaves
• Bark
• Paper
• Crayons or colored pencils

1. Lay the paper over the leaves, and rub gently with the crayon or colored pencil. The pattern of the leaf will be transferred to the paper!

You can also take bark rubbings from trees, or from pieces of bark that you find on the ground.

Use the leaf and bark patterns as components in a drawing, or use the designs to decorate signs, cards, or paper airplanes!

Make a Simple Tent

What you need:

• Trees
• Rope or Clothesline
• Sheet or Tarp
• Stones

For a fun outdoor hideaway, you can use simple materials to make an easy to put up and take down tent!

If you have two trees, or a tree and a nearby structure:

1. Tie a rope between them
2. Put the sheet or tarp over the middle of the rope so that it reaches the ground on both sides
3. Weigh down the corners of the sheet with stones or pieces of wood.
4. Enjoy your cozy outdoor hideout!

PRO TIP: Decorate the sheet with painted leaves or leaf rubbings, and display your spirit stick!

Tree Scavenger Hunt

What you need:

• Scavenger Hunt List (see below)
• Paper bag or basket

With a little prep work, you can have a fun outdoor scavenger hunt!

1. Make up a list of tree-related itemsHere’s our arborist-approved suggestions:
   • Acorn
   • Green Leaf
   • Brown Leaf
   • Flower
   • Twig
   • Branch
   • Catkin
   • Pecan
   • Bark
     PRO TIP: If you have unique trees in your yard, you can add items (like magnolia seed pods or horse apples) to personalize your list
2. Print out your list or write it on the paper bag
3. See how many of the items you can find!
4. Draw a picture of each item you found next to its name on the list!

At Texas Tree Surgeons, we love trees and we love our families! During uncertain or difficult times, it is more important than ever to recharge with fresh air and nature. Fun outdoor activities can help break up the boredom and monotony of being stuck at home, and can help kids (and parents, too!) learn about the environment around them. If you enjoy any of our suggestions, let us know by posting your photos and tagging us! And as always, if you have any questions about your trees, get in touch!

With the extensive and repeated storm damage we have had in 2019, many neighborhoods have lost their beautiful, established trees. While there is no quick fix to restore our urban forest to its former glory, planting new trees now will have benefits in the years to come.

Many communities have had recent programs to distribute new trees to residents, but they will do little good if they are not given the opportunity to become established and thrive. While trees are self-sustaining in nature, in our urban environment, planting needs to be performed carefully and correctly. Simply “sticking a tree in the ground and leaving it to grow” will, more often than not, prevent the tree from flourishing or even surviving. The care a tree receives during its first few years in the ground determines the health and longevity it will have decades later.

Planting Methods for Different Types of Tree

How your tree was grown at the nursery and delivered to you dictates the best methods to follow while planting. The most common ways that trees are sold are bare root, ball and burlap, and in a container.

Planting a Bare Root Tree

• Bare root trees can have some of the best long-term results after planting, but need delicate handling.
  • They are often shipped in groups, tied together, with a hydrating wrap around the root systems.
  • It is imperative that the roots be kept moist until the tree is in the ground; do not remove the root wrap until ready to plant.
• Because the roots are loose, they are easy to untangle.
  • When you are ready to plant, gently separate the individual root strands, being careful not to break the small root fibers.
  • Do not remove or prune any of the roots.
• Bare root trees should be planted in a hole at least three times the diameter of the spread out roots.
  • The hole should not be too deep; the root flare, where the trunk ends and the roots begin, should be planted about just above ground level.
  • When digging the hole, especially in clay soil, avoid smoothing the sides and bottom of the hole too much, as that may prevent water flow.
  • Make a small cone of earth in the center of the hole,on which the tree can be placed, with the roots splayed out around it.

Planting a Ball and Burlap Tree

• Burlapped trees have been grown from seedlings; once large enough, they are dug up and the root ball is wrapped.
• Burlapped trees are best planted as soon as possible.
  • They may be kept out of the ground for a short period as long as the burlap and root ball is kept moist.
• Always carry or move a burlapped tree by the root ball, not by the trunk.
  • Lifting from the trunk can stress or damage the tree.
• When you are ready to plant, remove the cloth wrap completely.
  • Also remove any staking materials, twine, or wire.
• Make sure the hole is at least three times the diameter of the root ball.
  • The hole only needs to be deep enough so that the top of the root ball is just above ground level.

Planting A Container-Grown Tree

• Container trees are the most common type seen at nurseries and in city programs.
  • They are often sold by the “gallon,” which specified the size of the container.
• Container trees can be kept out of the ground for a while if the soil is kept moist.
  • Be sure to keep the unplanted trees in a shady area so they do not overheat or dry out.
• Because of the carefully-managed growing conditions, container trees need particular care when planting.
• As with burlapped trees, always move a container tree by the container, not the trunk.
  • If the soil is dry, pulling from the trunk may remove the tree from the container.
• Container-grown trees are especially susceptible to root binding.
  • When you are ready to plant, remove the root ball from the container and examine it carefully.
  • Unwrap any roots that are encircling the root ball; if there are larger roots that cannot be moved, they can be cut.
  • Using the back of a shovel or your shoe, press down on the sides of the root ball, as you roll it over on the ground.
    • The goal is to loosen the compaction that occurs over time in the container.
  • If you have a small garden fork, brush out the root strands to straighten them.
    • Be careful not to tear or break the major root fibers.
  • While it can be overly time-consuming to straighten out all the roots, any steps taken at this point will greatly benefit the tree, especially during the first few years in the ground.
• Container-grown trees should be planted in a hole three times the diameter of the container.
  • Make the depth of the hole shallow enough to allow the top of the root ball or root flare to sit just above ground level.
  • If a great deal of the roots have been straightened out, you may need to make a small mound, as with bare root trees.
    • Evenly spread out any loose roots pointing away from the tree.

Backfilling the Hole

When replacing the soil around your newly-planted tree, be sure not to compress the soil too much. Adding the soil in stages, and heavily watering the soil, rather than tamping it down, between rounds can greatly help with soil stability while avoiding compaction. Only fill the hole up to just below the root flare.

Proper Mulching

Mulching is key when planting a young tree, especially with the North Texas climate. We have previously talked about proper mulching techniques, but the main things to keep in mind are:

• Mulch around the tree to a radius of two to three feet from the trunk.
  • Spread about three to four inches deep of mulch.
• Leave a space of at least three inches between the mulch and the trunk itself.
  • Do not pile mulch up against the tree.
• In the summer, or when water retention is a concern, make a small, raised ring around the outer edge of the mulch circle.
  • In winter, or during wet periods, you can simply spread the mulch flat.

Should A New Tree Be Staked?

With a properly-planted tree, staking should not be necessary. Be sure to remove any nursery-installed stakes or wires after the tree is planted. If you are in a high-wind area, or there is concern about damage to the tree from activity, a stake may help keep the tree upright and preserve the area. If you do choose to stake your tree, remove the stake after a year. Stakes left in place too long can prevent a tree from developing properly.

How Do I Water My New Tree?

Newly-planted trees need a lot of water, especially during the summer or dry periods. See our previous watering guide for more tips, but plan to water at least once a week during the fall, winter and spring, and twice a week during the summer. Use a soaker hose, running for an hour, or a garden hose on low for 15 minutes. Be sure to water the entire area evenly, and stop if water starts pooling or gathering on the surface.

Next Steps for Your New Tree

Even if they are planted, watered, and mulched properly, new trees may need some extra help. There are soil amendments, such as mycorrhizal fungi, that can be added to the roots when planting to help with water uptake. After planting, mulch and compost are an integral part of maintaining soil health. Seasonal fertilization and other soil amendments are always a good idea for young trees, especially in our urban soils. Consult a certified arborist to get recommendations on what will best help your new tree.

At Texas Tree Surgeons, we love trees, old and new, and we love our customers! While we don’t plant trees ourselves, we are eager to help educate our community to help homeowners plant their new trees. Following the storms of 2019, we will need massive replanting efforts to repopulate our urban forest, and those efforts start with individuals planting single trees. We hope this guide has been helpful; visit the Texas A&M Forest Service Texas Tree Planting Guide  for more info on planting trees in Texas. As always, if you have any questions about your new trees, your established trees, or how you can help our urban forest, let us know!