The roots of trees serve many functions, there are specific ones used for stabilizing while others are used for absorbing water and nutrients. While we tend to pay attention to what is easily visible like the canopy of the tree, roots need to be cared for just as much, if not more.
The best way to care for roots is by leaving them undisturbed. In a perfect urban setting that would look like a tree’s entire drip line (canopy) covered with mulch with minimal foot traffic. While this is not possible for many homeowners, reducing root disturbance is the next best thing.
Live oak roots cut to make space for new sprinkler system and sidewalk
Roots inspected by an arborist to assess tree health after airspading was done to decompact soil.
Often when we think of roots we imagine large support roots in the ground, when it is the fine absorbing roots in the top few inches of soil that keep the tree alive. When these roots are cut, or the soil around them is compressed the roots die.
A healthy tree can sustain some root damage, but a tree under stress, like one living in a city and not in forest, can not sustain this type of stress for long because this is most likely not the only stressor the tree is enduring. Often we see trees die years later from root disturbance after they have used up all of its stored nutrients.
Some species respond more drastically than others to root stress. Species that do very poorly are; post oaks, magnolias, red oaks, dogwoods, and sweet gums.
Air spading to decompact roots
Root pruning to remove girdling roots
There are times that roots will be disturbed by an arborist or tree health care technician to improve tree health.
Air spading is done to decompact soil so the tree is able to better absorb air, water and nutrients
Root pruning in a younger tree will be done to correct girdling roots
At Texas Tree Surgeons, we love trees and we love our community! If you are planning to remodel, do new landscape, or installation of sod we would love to help safeguard your trees. We are rooting for trees. Contact us today!
Damage from construction projects is the most common cause of tree death in urban environments, and while the effects may not be immediately apparent, the tree can be in decline and die years after nearby construction has been completed.
Injury to a tree happens unintentionally from mechanical tree injury, root damage, loss of rooting space, changes in soil moisture, soil compaction and contamination.
Why? Lack of construction protection and lack of understanding what constitutes the critical root zone of a tree.
Construction is the most common cause of tree death in urban environments, and while the effects may not be immediately apparent, the tree can be in decline and die years after nearby construction has been completed. Erecting a barrier to protect the critical root zone during construction will safeguard them from damage.
The most common problems associated with construction:
Root loss is generally caused by stripped soil, sub-grade preparation for pavement and trenching for utilities. Severing one major root can cause the loss of 15 to 20% of a root system.
Mechanical wounds (to limbs or trunks) caused by machines, poor pruning, high-traffic, and people.
When the soil grade is lowered a large percentage of roots may be removed. When the grade is increased a tree can be smothered because 90% of absorbing roots are in the top few inches of soil.
Soil compaction smothers trees by reducing available oxygen and decreasing a tree’s ability to absorb nutrients and water. This causes the roots to be more exposed to the elements, as they struggle to absorb water and nutrients.
Spills or dumping of fluids (paint, oil, fuel, etc.) can cause quick and rapid death of a tree.
During the planning process
Decide which trees will be kept, which trees must be removed and which trees need to be protected. Consider tree location, tree size, tree heath, tree species, species diversity and tree age (younger trees usually withstand construction better than more mature trees). Then assess the potential impact to the trees and make modifications in plans when possible. Identify tree work that must be done (pruning and crown-raising where necessary, treatments, irrigation, fertilization, mulching, and pest management) under the supervision of a Certified Arborist.
Think about the amount of time it takes to complete a construction project from start to finish. The tree is enduring a heavy amount of pressure for a long period of time. We assume there is no damage since the tree wont show the effects of stress until years after the project is finished.
Before beginning construction
Tree Work This should be performed under a certified arborist’s supervision and should include the necessary pruning, removal of dead wood, and removal of trees. This is ideally done in the winter time while the trees are dormant and at least 8 months to a year before construction begins. This is the time to begin a deep root fertilization and Tree Health Care Program that will help strengthen and protect your tree.
Erect Barriers The barriers should be as far from the base of the trunk as possible or a minimum of the drip line. Within the Tree Protection Zone, mulch should be applied 2-4 inches deep around the base of the tree within the barrier.
Mulching Where barriers are not possible, avoid compaction by mulching 6 inches deep and laying plywood on top to disperse weight. For removal of mulch at the end of the project consult with an arborist.
Reduce Chance of Harm Limit access to site to avoid unnecessary soil compaction: Create one road in and one road out of site with barriers on either side. This route can later be used to trench for utilities, water lines, driveway, etc.
There are no protective barriers around the tree. Materials are being kept at the base of the tree and compacting the soil.
During construction
Water Water trees frequently with slow soak. If roots have been damaged or removed, then a tree will need more water than it did before because it has less ability to uptake necessary water.
Feed Trees should be fertilized at least three times a year. We suggest a deep root organic fertilizer to increase available nutrients.
Pest And Disease Control When trees become stressed from construction they are more vulnerable to pest infestations and other diseases.
Pruning During construction, we only want to remove what is necessary for the project to continue. This includes damaged limb, dead wood, or infected sections. No other pruning should be done if not necessary.
Post construction
To help enable survival of your trees, treat and seal crown and trunk injuries, cable and brace, repair irrigation and drainage issues harmful to trees; remove excess mulch and mulch for long-term health of tree, aerate soil that has been compacted, fertilize for the next few years. Have the trees inspected seasonally by a Certified Arborist.
Symptoms of tree stress from construction damage
Short annual shoot elongation, small yellow leaves, thin foliage, leaf wilting, early fall coloration or defoliation, epicormic shoots, twig dieback, branch dieback, irregular wounds, secondary pest problems, and decay at wound sites.
At Texas Tree Surgeons, we love trees and we love our community! Trees are a wise investment of funds because landscaped homes are more valuable than non-landscaped homes. If you are planning to remodel, or do construction we would love to help safeguard your trees.Contact us today!
